DigitalCircuits
New Member
How can design modulo 11 counter with using "T flip-flop's and decoder"?
Can you help?
Can you help?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hello,
Basically for almost any counter under 16 you create a 4 bit counter with FF's and then decode the next state above the last one and reset all the counters with that output.
For your counter you would decode the binary 1100 count (12 decimal) and run the output to all the reset pins of the FF's. That way when the counter goes to 12 it resets itself to zero within a reasonable time period. After the counters are reset the decoder output goes back to normal state so it then allows normal counting again so the count goes from 0 to 11 and then back to zero again.