Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Control servo motor with PWM (PIC16F877A) using mikroC pro

Status
Not open for further replies.

nokia_sa

New Member
I want to control a servo motor with PWM (50Hz) using mikroC pro

NOTE: the servo motor uses a signal with 20ms or 50Hz

PLEASE HELP :(
 
Check out other posts about servo control in this forum.
 
The PWM will be too fast to control a servo, you will have to do it in software.

As Alec said, there are a few threads around here on controlling servos.
 
servo motor is not much difficult to operate .... check this link ..... it will help completely .... .... Moreover if you want a ready made project then send me a message .... u will get it within 10 days ....
 
Last edited by a moderator:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top