Reloadron - nice process control system cabinet.
Now for something a bit smaller, the control box for my CNC Milling Machine.
The front panel layout is not my own choosing, I inherited it when I bought the mill.
However the wiring behind it is all mine.
Looking inside the cabinet:
Note that the "noisy" mains and spindle motor drive cables are kept away from the DC and control wiring.
Wiring is routed together between the individual components, and held together with (sexy?) yellow cable ties.
Note the use of sticky pads to hold the wiring in place to the cabinet sides and equipment mounting plate.
Like Reloadrons cabinet, this one has a mounting plate for the insides, which can be assembled in the open on the bench and then fitted into the box when completed.
Behind the top panel with the external connections.
Some of the wiring from the connector panel to the stepper motor controller and the MPG controller is a bit spidery.
The MPG controller was a slightly later addition and was followed by my taking a big break from the project.
The break culminated in me just closing up the cabinet and using the mill, and leaving the tidy-up work until mañana.
Note, in this context an MPG is a Manual Pulse Generator, which is CNC speak for a manual control for setting the position of the cutting tool.
JimB