Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

CD4051 analog multiplexer crosstalk

Status
Not open for further replies.

Mojalco

New Member
Had anyone experienced any problems on using CD4051 analog multiplexer regarding crosstalk? Is there a relation between the supply voltage with the crosstalk?

I use 5 volt supply for it. And inputs on the CD4051 ranges from 0 to 5V linear.

Any suggestions??
 
Use a lower impedance (and therefore more distortion) on the inputs of the "receiving" circuits, or use more multiplexers to switch the unselected receiving circuits to a low impedance idle voltage.
 
can i use CD4051/52/53 for mobile phone switching?
In my project i have to receive the call from mobile to hand set out of 5 mobiles. when any other will ring i have to disconnect first one and receive the second..
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top