Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Can nRF24L01 apply on Attiny MCU

Status
Not open for further replies.
The Attiny Controllers are a complete family from little 8pin Controllers up to Chips with 20pin's.

Nearly every AVR Controller has an SPI Port that's required for the nRFChip. Software SPI is an Option too, but very slower.
The Tiny should have an external Interrupt too, to use the INT Option of the nRF's and few other free Pins to handle the steering lines of the nRF.
I think the limiting factor is the Programm space of the tiny Controllers, but that depends of Your application too.
A simple description of handling the Chips You can find here: https://www.mikrocontroller.net/articles/NRF24L01_Tutorial
Sorry that's in German, but Code and Schematic's are International.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top