Build own programmer

[radialspel]

Is here anybody who have the schematics to a programmer that supports PIC16F876, PIC16F876A, i have made a ludipip programmer to PIC16F84,PIC16C84 is it possible to use that?? and where do i find software to it that works in Windows XP??

 

[pike]

Asumming that this ludipipo programmer is JDM based, IC-Prog would support it. you can use your existing prograammer for this. Your programmer should output 5 things:

VPP
5v
ground
data
clock

Have a look at the datasheets for the chips, they give you the pinouts of them.

www.ic-prog.com

you have to download the NT driver aswell, because you have XP.

 

[kentken]

I use Byron Jeff's LVP programmer
http://www.finitesite.com/d3jsys/
With David Tait's FPP **broken link removed**

For HV Programer I use a Schaer Based Programer, 7407 with pnp trans.
http://perso.wanadoo.fr/softelec/index_us.htm

Most all 16X series will program the same, the software interface, can be the tricky part.

 

[kentken]

i just saw a newer PDF about programming
**broken link removed**