Breadboard prototyping adapters

[ilan1]

A company called Winford Engineering makes these breadboard
adapters (http://www.winfordeng.com/products/cat_pbc.php) for
DB9/15/25, RJ11, etc, but they don't make an adapter for PS/2
and USB.

Does anybody know of any company that makes a PS/2 and/or
USB to 0.1" header adapter for breadboard prototyping?

I know that I should just make my own, but I'm kind of lazy and
I am terrible at soldering.

Thank you.

Ilan

 

[Pommie]

You don't have to be that good at soldering to make your own. I made one from a scrappy bit of veroboard.

Here it is with a 16C745/JW.

And from the other angle.


Mike.

 

[ilan1]

I'm sort of not familiar with veroboard. Are there copper traces on it?

Thank you.

Ilan

 

[Pommie]

A search will find lots of information but a good site to see veroboard is .
Here's a picture from there.
**broken link removed**

Mike.

 

[ilan1]

In case anybody later reads this thread, I found what I was looking for at:

https://www.technologicalarts.ca/catalog/product_info.php/cPath/38_153/products_id/178

Ilan