Screech
New Member
I bought a battery charge to charge up AA batteries for my digtal camera.
It charges 2 banks of 2 AA batteries. (4 batteries).
Each bank seams to be outputing 5.8 volts and 300 milliamps when I replace the batteries with my multimeter.
or,
It can charge 2 banks of 9 volt batteries.
Problem is when I checked the output voltage of the charger with my mutli-meter,(no batteries connected) it reads 5.8 volts. It also gave out 80 milliamps of current :!:
the specs on the back of the charger says
2 x(2.8Vdc 170-190 mA) - size AA
2 x(9.0Vdc 14-17 mA) - size 9V
Whats going on, especially with the 9volt part?
Is this charger faulty?
Thanks
It charges 2 banks of 2 AA batteries. (4 batteries).
Each bank seams to be outputing 5.8 volts and 300 milliamps when I replace the batteries with my multimeter.
or,
It can charge 2 banks of 9 volt batteries.
Problem is when I checked the output voltage of the charger with my mutli-meter,(no batteries connected) it reads 5.8 volts. It also gave out 80 milliamps of current :!:
the specs on the back of the charger says
2 x(2.8Vdc 170-190 mA) - size AA
2 x(9.0Vdc 14-17 mA) - size 9V
Whats going on, especially with the 9volt part?
Is this charger faulty?
Thanks