Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Basics to make it operate the 16F877 Advise Please

Status
Not open for further replies.

Lynny

New Member
Hi
I got interest in programming and started with the 16F84A using Picbasic.
followed the diagram on how to make it run it worked fine that was:

4.7K resister on the MCLR pin to 5Volts
Vss to ground
Vdd to 5 volt liine and decoupled with a .1 to ground
Osc1 and osc2 4 meg crystal plus 2 x 22pf capacitors to ground.

this works OK

I now want to try using the 16F877 my question: if I follow the above again will it work OK or can anyone tell me what the basics would be to make it run or a URL I can look at for this basic info

Thanks a lot

Lynny :oops:
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top