Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

B & C microsystems Proteus Eprom Programmer Software

Status
Not open for further replies.

dratomic

Member
Hello There Folks, Dr. Atomic Here.
I just obtained a B & C Microsystems proteus eprom programmer
that seems to do about everything. I got it off of eBay and when I
received it SUPRIZE :shock: , there was no software. Does anyone out
there have a copy or know where a copy of the programmers software
may be obtained? B & C Microsystem's website is gone and the copy
on Archive.org didn't save the zip files associated with the site. This
burner seems to do everything and has a 40 pin socket and plcc socket
attached. However without software it is nothing but a pretty doorstop.
HELP! I paid a pretty penny for it and again SUPRIZE! :x the seller has
disappeared. I guess I was lucky to get it at all but it will make an
expensive doorstop. If you have any information it would be a helpful
launching pad for a search, though I've really searched and searched
and come up dry. I would even be willing "sigh" to PAY to get a copy.
Please let me know.

Dr. Heinrich Atomic
 

Victoria Seeley

New Member
I know it has been a long time since you posted this question, but I was looking to sell my Proteus programmer, documentation and floppy disk software. I would be willing to send you a copy of the paperwork and diskette. Not looking to make a money on the info, do you have the ability to use a floppy or copy to another form of storage? I no longer have a floppy drive and cannot even test it myself.
 

JimB

Super Moderator
Most Helpful Member
Certainly has been a long time!

Thankyou for the reply to the thread, but dratomic does not appear to have visited the forum since 2010.

JimB
 

DaveC2

New Member
Hello, does anyone have this software? Or know where I can download it?

B & C Microsystems PROTEUS EEPROM Programmer w/ AMUPLC84 Module & Software

(modified 2-20-15)
 
Last edited:

DaveC2

New Member
Sorry, I copied and pasted from the eBay listing title and didn't think to change the font type and size. I will try to PM her. Thanks, DaveC2
 

JimB

Super Moderator
Most Helpful Member
Your sins are forgiven. :D

JimB
 
Status
Not open for further replies.

Latest threads

Top