Atmel EEPROM and PIC?

I just bought atmel - at25320b SPI EEPROM. Can I make it wirk with PIC16f887? Pinout is the same, page system is the same (32 Bytes per page) as Microchip 25LC320A. Is there anything else I should consider?
In Atmel's manual it is said that it is designed to work with 6805 and 68HC11 series of microcontrollers. Would PIC be any different?
Could I get it work with this example? **broken link removed**

If anyone has some experience please let me know, I'm trying to avoid spending many hours/days figuring out how to make it work if it never wll.

hi,
Looking at the AT24320 datasheet I would say that it uses the standard 3 wire SPI interface protocols, so it should be OK.

The MSSP on the F887 should work fine with that EEPROM.