Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

ADC reading , Timer interrupt - dspic33ch128mp508

Status
Not open for further replies.

chaminda12001

New Member
Hi,

I am trying to read ADC channel 0 using Timer interrupt to trigger it. I am using dspic33ch128mp508 curiosity development board for anologue reading using potentiometer annologue channel 0. When I debug, I dont get any value on the Anlogue channel 0.
I am using MPLAB X IDE 5.10 for debugging. Here is my code. Any thoughts on this?

int main(void) {

TRISE = 0x0000;

adc_init();


PORTEbits.RE0 = 0;


T1CON =0;
TMR1 =0x0000;

T1CONbits.TCS = 0;
T1CONbits.TCKPS =0;
T1CONbits.TGATE = 0;
IFS0bits.T1IF = 0; //Timer interrupt flag
IFS5bits.ADCAN0IF =0;
IEC0bits.T1IE =0; //Interrupt enable
IPC22bits.ADCAN0IP =1;
IEC5bits.ADCAN0IE =1;
PR1 =0x0002;
ADCON1Lbits.ADON = 1;
T1CONbits.TON = 1; //Timer 1 T1CON enable


while(1);


}

void adc_init(){


TRISAbits.TRISA0=1;
ANSELAbits.ANSELA0=1;
ADCON3Hbits.CLKSEL0= 1; //FOSC clock selection
ADCON3Hbits.CLKSEL1 =0;
ADCON3Hbits.CLKDIV =0;
ADCON3Lbits.CNVCHSEL0 =1; // Channel selection 1
ADCON1Hbits.SHRRES =1; // 12 bit resolution
ADCON2Lbits.EIEN =0;
ADCON1Hbits.FORM =0; //Output format
ADMOD0Lbits.SIGN0 =0;


ADCON3Lbits.REFSEL =0; //ADC Reference voltage selection


ADCON3Hbits.SHREN =0;
ADCON5Hbits.WARMTIME = 0x2;


}

void __attribute__((interrupt, no_auto_psv)) _ADCAN0Interrupt(void)
{

i = ADCBUF0; // read conversion result
PORTEbits.RE0 = i;
_ADCAN0IF = 0; // clear interrupt flag

}
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top