well
Measured the amps.....
To measure the amps i putted my meter in series with the device...
When the device was moving my meter could measure something because it takes very short time.
When i gave some force on the lever to move it from his position it the amps reach a max of 1,7Amp if the voltage drops i dunno know.
When i gave an reasonable amount of force you reach maximum 0,8amps..
when i want to win from the device it let me win but it then consumes 1,7amps and just waits for me to stop with the force...
conclusion: Looks like one Reg per Servo is defendable (its reasonable to choose the solution) because the force the servo has to cope with is many times less then what i give with the hand.. (in real life the servo always wins..)..
in case the machine fails or something fails and the servo would be defending his position and consuming 1,7amps.. it will simply put the regulator in Short Circuit mode i guess..???
When short circuiting the regulator my meter gives 1,86 amps...
Sow the regulator is bigger then the servo.
Nigel i just solder one reg per servo.
Thanxs for the tip.
Regards,
Tks