Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

5 wire 110 v cap start with a relay is 1.5 hp

Status
Not open for further replies.

Bobjoe

New Member
Need some help wiring this motor,it is Emerson on a Delta saw around 1990 vintage. From frame 1 blue,1 red, 1 yellow,1black,1brown.they ohm out as follows black to white 1 ohm, yellow to white 1 ohm,black to white 5 ohms.there is a overload switch enter black wire from source . Then a relay enter common from source.there is a 240 mfd capacitor which has jumper from start relay. I wired per diag on mtr plate it ran very slow in reverse. This is a dual voltage mtr.
 

Attachments

  • 16665642459161128141256.jpg
    16665642459161128141256.jpg
    1.1 MB · Views: 154
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top