Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

1N3211 diode and 1N3711 diode

Status
Not open for further replies.

gary350

Well-Known Member
I have a coffee can full of old diodes I want to use for my 100 amp 22 volt power supply if possible. These two diodes both have 1/4" threaded studs. I did a search for data sheets and I am fining all kinds of stupid information.

1N3211 one place says it belongs to a family of 1N3210 diodes but no information.

One place claims it a 10 amp choke coil. LOL

One place says it is a 200 amp mosfet. LOL

One place claims it is a 200v regulator. LOL

Does anyone have voltage and current rating for the 1N3211 diode?

I am having no luck at all with the 1N3711 Diode either.

I have more diodes with odd numbers, 7016, 2050-10, and more all with 1/4" threaded studs.


Also I have SCR or SCS don't know which with 1/2" fine thread stud terminal, 1 main terminal, 1 red wire, 1 white wire, number M57-1973
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top