16F723A issue

Status
Not open for further replies.

DemonicSandwich

Member
Does anyone know if the 16F723A can be used with the PICkit 2?
According to this **broken link removed** the PICkit 2 supports the 16F723A.

However when I boot up the PICkit2 App, the device comes up as "Unsupported Part (ID=1B00)", and when I select Manual Device selection, it does not appear in the drop down box.
 
According to my MPLAB Configure/Select Device list, NO. It is not supported by PICkit 2.
 
I actually was using the standalone software as MPLAB doesn't allow me to load the PICkit2 as the programmer when the project uses a 16F723A.

I thought the issue with the standalone software was due to outdated Application and Device File versions as they were indeed out of date.
However after updating them (to 2.61.00 and 1.62.03 respectively) the result did not change.
 

I find it under manual selection, Midrange/1.8V Min. Not where you would expect it at all, seems like a Microchip goof.

Edit: O.K. I see the data sheet does say its voltage range is 1.8V-5.0V , so not a goof.
 
Last edited:
Status
Not open for further replies.

Similar threads

M
  • Question
Esp32 issue
Replies
5
Views
2K
danadak
F
  • Question
Issue with Interfacing LCD with PIC16F877A
2
Replies
22
Views
9K
Farhaad
F
  • Question
using PICKIT2 AND 3 issues
Replies
6
Views
2K
Ian Rogers
A
  • Question
MSP430G2553 issue in Transistor interfacing
Replies
14
Views
3K
danadak
J
  • Question
What might be cause of sudden left turn steering problem and how to duplicate this issue?
Replies
3
Views
9K
rjenkinsgb
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…