Hello everyone,
I have attached a snip image of a design I am using and have been using for almost a year and a half now...
Here is the story on the board.
(Jump down to circuit explanation if you want)
Last year, I made a few hundred using the MP2357 regulator, but since it went out of...
Hello everyone!
The title pretty much says it.
I'm using two heating elements to heat up a vessel of about 4 in^3 and this is the way I'm thinking about doing it. (senior ME student here so please easy with the jargon)
So here is the way I'm wiring the thingy:
The problem with this setup...
I found a lamp at home which is not working.
I have used the multimeter to detect where the problem was coming from and it seems that the problem is coming from the transformer. It's a 220 to 12 volts transformer and I can read 220 in the input, but nothing in the output. So, something is not...
First off I'm totally new to the electrical scene and only know what I've learned online and hands on. Which can be a bad thing if your listening to the wrong person. So here it is :
My Problem : I am using an 18 volt dc lithium drill battery to power led lights and a car horn on a project. The...
Hey guys,
This is my first post and I am happy to have found this website. I am currently working on a project using a PCB and jumper wires to make a 48v Phantom Power supply to be used with multiple condenser microphones. To make a long story short, I found a "mostly" detailed post on another...