I am coding SSD display using 2 cascaded shift registers. I am using a mikroC for PIC compiler. I can display a static sequence of numbers upto 4 digits with my code
#define SHIFT_CLOCK PORTB.F1 //Clock Connection of 74HC595 SSD Driver
#define SHIFT_LATCH PORTB.F3 //Latch Connection...
Hello All,
I am using two 74HC595 Shift Resisters for a 4digit SSD.
The problem is that the display needs to be delayed while scanning through the digits. I do not want to use delay since while the display is on, nothing can work as the processor is busy in delay loop. So I thought I will use...
Hello Guys,
I am trying to implement a delay using timer0 interrupt. I'll just post an abstraction of the code in mikroc
void inittimer()
{
//Timer initialization for a 32ms interrupt
}
void interrupt()
{
//interrupt code;
delayvariable++;
}
void main()
{
TRISB = 0...
have a a Project that measures the voltage from a 3-phase lines and Display it on LCD using PIC16F877A.
I wrote the code in the mikroc language; the problem is that the LCD shows a lot of wrong characters.
this are the Project code `sbit LCD_RS at RB4_bit; sbit LCD_EN at RB5_bit; sbit LCD_D4...
Hello
I have a program and a ready hex file. in my folder.
First help me in process of simulation of program - how to perform simulation ,things i will need etc sharing a basics level link will be appericiated .
I want to burn PIC 12F1822 with the said file i have.
What i really want to know is...
Hi I am using pic18f452 and I am trying to get it to communicate with laptop through RS-232. I used hex file from mikroC built in library code and tried burning it using genius g540 it didnt work I got HIGH(Logic 1) output on several pins I didnt code to and LOW(Logic 0) on which I coded to get...