Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

flyback converter

  1. polashd

    How to modify/ design error amplifier compensation circuit (with TL431) for variable flyback converter and make it stable.

    I bought a power supply adopter (old, used, made for some device) of 24v 4.5A (from 230vac mains). It is a fixed output psu. My intention is to make it a variable psu of 30v to <=5v (as low as possible, and continuously variable). Schematic (simplified) of its error-amp circuitry is attached...
  2. hesam_m

    85V-260VAC to 5VDC-2.5A Flyback Switching Power Supply

    The key part of any electronic device is the power supply. Any instability or malfunction of the power supply part causes the device to stop working or demonstrate weird behavior. In this article/video, I introduced an AC-to-DC flyback Switching power supply that converts 85V-260VAC to...
  3. hesam_m

    220VAC to 8VDC 24W Flyback Switching Power Supply

    The most important part of any electronic device is the power supply section. Any instability or malfunction in this part causes the device to stop its operation or show weird behavior. In this article/video, I introduced an AC to DC Flyback Switching power supply that converts 220V-AC to 8V-DC...
  4. hesam_m

    220V-AC to 12V-DC 18W Switching Power Supply

    Flyback is the most common circuit topology to build galvanically isolated AC to DC or DC to DC converters. Flyback circuit is cheap and relatively easy to manufacture, therefore nowadays the majority of home or industrial appliances are powered using AC to DC Flyback converters. In general, a...
  5. polashd

    Relation between PFC and Load power demand in SMPS (flyback) converter

    I tried to understand PFC in an SMPS voltage converter. I read from many websites but still confused very much about the following things. Situation: it’s an SMPS flyback (for example) converter, to output (for example) 24v dc to an inductive load of 100W (average). Input 230v AC mains 50Hz...

New Articles From Microcontroller Tips

Back
Top