I tend to overthink and find simple concepts diffcult. I understand the charging of cap C1 in figure “A”. My question is in figure “B”. With the switch there, cap C1 discharges thru R2 back into + plate of C1. Why doesn’t current get pulled from battery thru R1 and R2 as well? Doesn’t it...
Attached image of Coconut cutter product electrically operated mains supply(AC). Can it also work with Batteries (DC)?
Thanks & Regards,
Prashant S Akerkar
Ok so I have a emad off road electric skateboard. Originally it is powered by 3 12v 10ah batteries wired together in series. To power a DC motor (model#MY8919) that's rated for 36v 28.4A 800w output. All controlled with a rc remote. Now after a lot of troubleshooting. I have come to the...
Hello all,
I am working on a ROV (Robot) for underwater missions. I need a beefy switch for main power distribution, which should be able to handle at least 25 Amps.
My current choice is this Rotary Switch:
https://amzn.to/2ukEgs2
According to the seller its rated for 10 Amps at 440...
I have a vintage motorcycle (1934 Levis 500cc model D) with a BTH mag generator which I have just fitted. The dynamo is a small permanent magnet DC type, but chucks out about 6v at tickover rising to about 15v when revved. I need a voltage regulator for this machine to avoid blowing all my bulbs...