1. Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
    Dismiss Notice

z80 simulator from oshonsoft problem

Discussion in 'Homework Help' started by meowth08, Jun 23, 2012.

  1. meowth08

    meowth08 Member

    Joined:
    Aug 18, 2011
    Messages:
    241
    Likes:
    7
    Location:
    Philippines
    Hi,

    I had a problem in simulation.

    I opened the simulator.

    I opened Tools-Assembler.

    On the assembler:

    I wrote the program.

    I clicked tools and assembled the program and it indicated no error.

    I saved it with .asm extension file.

    I clicked Tools and Assemble and Load.

    I went back to the where I started.

    The .obj file is already there for simulation.

    I wanted a step by step simulation so I changed the settings.

    I simulated it and clicked for STEP but all were NOP.

    I have already read the "Getting Started". I followed the simulation procedure. Still, all NOP. :(
     
  2. ericgibbs

    ericgibbs Well-Known Member Most Helpful Member

    Joined:
    Jan 4, 2007
    Messages:
    21,235
    Likes:
    645
    Location:
    Ex Yorks' Hants UK
    hi meo8,
    As a test I installed the OS Z80 trial.

    Used a sample program in assembly, assembled ok, makes obj, lst and hex files.

    Runs ok in Ultimate and Step for me.?

    E.
     
  3. meowth08

    meowth08 Member

    Joined:
    Aug 18, 2011
    Messages:
    241
    Likes:
    7
    Location:
    Philippines
    Thanks sir eric.

    I'll check if it generates .lst, .obj, and .hex file

    m8
     
  4. dave

    Dave New Member

    Joined:
    Jan 12, 1997
    Messages:
    -
    Likes:
    0


     
  5. meowth08

    meowth08 Member

    Joined:
    Aug 18, 2011
    Messages:
    241
    Likes:
    7
    Location:
    Philippines

    haha.. I already figured out what went wrong..

    org 8000H :mad::p:mad:
     
    Last edited: Jun 28, 2012

Share This Page