1. Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
    Dismiss Notice

SAMSUNG TV monitor.

Discussion in 'Datasheets, Manuals or Parts' started by ramondo, Jun 14, 2017.

  1. ramondo

    ramondo New Member

    Joined:
    Dec 13, 2016
    Messages:
    10
    Likes:
    0
    Location:
    Youngstown,Ohio USA
    I am working on Samsung Model UN22f5000af, power led is on steady but will not turn on. Any diagrams or info will be helpful. TIA


    Thanks to all for BEING.
     
  2. Nigel Goodwin

    Nigel Goodwin Super Moderator Most Helpful Member

    Joined:
    Nov 17, 2003
    Messages:
    39,294
    Likes:
    647
    Location:
    Derbyshire, UK
    ONLINE
    A common fault on many small Samsung sets is the inverter transformer - assuming this is a CCFL model?.
     
  3. ramondo

    ramondo New Member

    Joined:
    Dec 13, 2016
    Messages:
    10
    Likes:
    0
    Location:
    Youngstown,Ohio USA
    MY Bad, this set is a 22 inch LED tv and monitor, no ccfl. But as a follow up? This set is powered by an external 14v dc supply (measured at 14.26 v). Before I BREAK open the welded case can anyone suggest the acceptable ripple on that output and do you think any main board components would cause (no turn on) if ripple is too high.


    Thanks to all for being.
     
  4. dave

    Dave New Member

    Joined:
    Jan 12, 1997
    Messages:
    -
    Likes:
    0


     
  5. vedo35

    vedo35 Member

    Joined:
    May 5, 2006
    Messages:
    138
    Likes:
    1
    Location:
    Nederland

    Check out very good power board. Like bad cap, resistos, be sure TL431 is ok.
     
  6. ramondo

    ramondo New Member

    Joined:
    Dec 13, 2016
    Messages:
    10
    Likes:
    0
    Location:
    Youngstown,Ohio USA
    I have found service manual for this Samsung chassis U86B,and of course NO schematic. It does have some troubleshooting info and I NEED some assistance with the nomenclature used.

    Examples,,
    A power tree diagram mentions supplies of "A5v_PW and B5v_PW" I assume 5 volts but don't know about the A or B or PW and neither one is anywhere near a PWM source.
    There are several mentions of "SW_Power", what does SW mean?

    On silkscreen on PCB parts are labeled as "Qxxxx_AD or Qxxxx_JT or Rxxxx_PC"
    What does AD,JT,or PC mean.

    The following image is from SHOPJIMMY.COM shopjimmy-bn94-06177a-top.jpg Clipboard01.jpg
     

Share This Page