Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

philips crt TV screen going off after power ON

Status
Not open for further replies.

rasika dharmasena

New Member
my philips crt tv screen going off when power on. it will remain only about 4 seconds and suddenly going off.. but power supply remain on position.. plz help me.. thank you
 
Check the ultor cap to the top of the tube, do you hear the whistling after switching on ? You may have partial discharge on it and overloading the flyback transformer. Check all high voltage wiring as well.
Ensure the TV is unplugged from the mains, and discharge the ultor cap terminal to screen aquadag earth wire before touching carefully by inserting a small screwdriver with earth lead underneath the rubber dustcap.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top