1. Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
    Dismiss Notice

Newbie questions

Discussion in 'General Electronics Chat' started by cancom, Nov 17, 2002.

  1. cancom

    cancom New Member

    Joined:
    Nov 17, 2002
    Messages:
    1
    Likes:
    0
    Hi

    Could someone tell me if Atmel's 90S2313 once locked can be read without erasing flash and eeprom?

    If so what program is recommended?

    Thanks in advance

    cancom :D
     
  2. kinjalgp

    kinjalgp Active Member

    Joined:
    Oct 28, 2002
    Messages:
    1,851
    Likes:
    3
    Location:
    INDIA/USA
    No! According to datasheet, you cannot read the contents of ROM in any way once the secuirty bits are fused.
     
  3. tommy

    tommy New Member

    Joined:
    Jan 10, 2003
    Messages:
    12
    Likes:
    0
    get the bios revision number ....when you start your computer and you see bios revision number ..........then go to the bios mkers webpage...................what happened reflash you bios and some hardware is missing. this happened to me once very easy to fix
     
  4. dave

    Dave New Member

    Joined:
    Jan 12, 1997
    Messages:
    -
    Likes:
    0


     
  5. kinjalgp

    kinjalgp Active Member

    Joined:
    Oct 28, 2002
    Messages:
    1,851
    Likes:
    3
    Location:
    INDIA/USA

    Sorry to say Tommy you are on the wrong track. We here are discussing about the Microcontrollers Flash ROM which could be read or not after programming and fusing the security bits.
     

Share This Page