Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Need help with blank Atmel AT90S2313, they all appear dead

Status
Not open for further replies.

bbiandov

Member
Hello,

I am having a bit of a problem with shipment of new AT90S2313s. They appear dead. With VCC and GND applied and XTAL at 8MHz I read nothing on PB and PD pins. Nothing - that is my logic probe does not indicate high nor low. Is my batch bad? Or say if the XTAL is not oscillating for some reason (say my crystal is bad) I should still be able to read the other pins low or high correct? I can not directly verify oscillating because I don't have freq counter nor scope at home.

Needless to mention, the AVR does not respond to programming...

thank you
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top