1. Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
    Dismiss Notice

looking 4 a solenoid

Discussion in 'Robotics & Mechatronics' started by rahul_1906, Sep 4, 2012.

  1. rahul_1906

    rahul_1906 New Member

    Joined:
    Sep 4, 2012
    Messages:
    2
    Likes:
    0
    I am looking for a solenoid that will perform atleast 10 cycles per second. Any1 if has any info plz let me know. Thank you
     
  2. misterT

    misterT Well-Known Member Most Helpful Member

    Joined:
    Apr 19, 2010
    Messages:
    2,697
    Likes:
    368
    Location:
    Finland
    What is the application? What kind of force and stroke you need? What kind of load are you pushing/pulling?
     
    Last edited: Sep 4, 2012
  3. rahul_1906

    rahul_1906 New Member

    Joined:
    Sep 4, 2012
    Messages:
    2
    Likes:
    0


    It's to be used in i.c. engine. I was old that it's difficult to find such a solenoid as the heat and stresses generated due to such high cpm (cycles per minute) will be pretty large.
    The load is of both type push and pull. The push load might be larger than the pull load.
     
  4. dave

    Dave New Member

    Joined:
    Jan 12, 1997
    Messages:
    -
    Likes:
    0


     
  5. Kordz

    Kordz New Member

    Joined:
    Nov 19, 2012
    Messages:
    3
    Likes:
    0
    Location:
    SYD, Australia

    I think Kendrion have 24V oscillating solenoids with a fair amount of grunt at short stroke lengths. Not sure about 10 cpm
     

Share This Page