Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Frequency Generator Project... Help.. Noob :)

Status
Not open for further replies.
I will be running this frequency generator through an insulated copper wire wrapped around a sacred Cubit tensor (copper) coil which will have a cleansed crystal inside the tensor field. As I said I just need help with how to build a small device that will produce a 15hz (and other) frequency to run through the whole thing. The tensor coil produces its own energy. Just need a frequency generator. Without paying for someone else to do it. Its an intention thing. Thats all. So far I have learned quite a bit. I still do not know how to attach power in and frequency out to alligator clip yet. Am sure it is just a matter of soldering the cables into the correct position on the thingy that all the electronic things sit on... :)
 
Oh, since you ask, the leads with aligator clips go to output and gnd. You can buy leads with the clips pre-attached, probably cheaper than buying just the clips and making the leads! One of the leads has to share the gnd pin with battery (-). Vcc is battery (+)
If building your own, you may be better using through hole components and a bit of perforated board. MUCH easier!
Legend!!! :) Hahaha... mind reader
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top