1. Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
    Dismiss Notice

Basic & ISIS sim

Discussion in 'Oshonsoft' started by Mosaic, Mar 27, 2011.

  1. Mosaic

    Mosaic Well-Known Member

    Joined:
    Jun 3, 2010
    Messages:
    2,569
    Likes:
    128
    Location:
    Caribbean
    Hi guys,

    Is there a procedure to simulate OSHONSOFT BASIC debugging in ISIS? I'd like to set code breakpoints etc and track variables. Or do I have to 'read' the assembler routines represented by the BASIC instructions?

    i am running an app. that uses a serial to parallel 4 digit 7 segment LED display chip and I can't simulate that chip in Oshonsoft.
     
    Last edited: Mar 27, 2011
  2. georgetwo

    georgetwo Member

    Joined:
    Jul 30, 2009
    Messages:
    197
    Likes:
    8
    Location:
    DELTA state Nigeria
    After compiling, all you need to do is open isis and load the hex file generated by oshonsoft and run after all connection. Is there any other problem?
     
  3. Ian Rogers

    Ian Rogers Super Moderator Most Helpful Member

    Joined:
    Mar 28, 2011
    Messages:
    9,160
    Likes:
    909
    Location:
    Rochdale UK
    I use ISIS and after the oshonsoft compile (I use compile & load) keep the watch var's window open and transfer varables to ISIS watch window, if you create a running varable i.e. "Dim codeWatch as word" and increment after each line (just for debug puposes) you can set that varable to stop / pause ISIS on change in the watch window so you can have good debugging.

    Thats how I do it. I am working on a COFF convertor but it's taking me some time.

    Cheers Ian
     

Share This Page