Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

A kind of SWD & JTAG Isolater

Status
Not open for further replies.

tom xiao

New Member
Hi,
I designed a kind of SWD & JTAG Isolater for Jlink & STLINK, for online debugging.
This may keep person and PC USB port from PCB board burning.
Can be used in Motor Control, Digital Power and some high-voltage applications.

IDE: Keil, IAR, Jflash, STM32 ST-LINK Utility;
SWD: 2MHz;
JTAG: 6MHz;
 

Attachments

  • 幻灯片1.PNG
    幻灯片1.PNG
    272.7 KB · Views: 299
  • 幻灯片2.PNG
    幻灯片2.PNG
    291.9 KB · Views: 309
  • 幻灯片3.PNG
    幻灯片3.PNG
    291.1 KB · Views: 306
  • 幻灯片4.PNG
    幻灯片4.PNG
    260 KB · Views: 306
  • 幻灯片5.PNG
    幻灯片5.PNG
    261.1 KB · Views: 303
  • 幻灯片8.PNG
    幻灯片8.PNG
    34.7 KB · Views: 304
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top