Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

8x8 led matrix using 8052 using assembly language

Status
Not open for further replies.

shashy

New Member
hi i have a project to write on led matrix using assemble language

what i have done using 7442 decoder and when set on 00h it gives us the first column and then write what i want on first column i will write you what i wrote

INCLUDE 89c52.mc

MOV 20H, #00001100B
MOV 21H, #00001100B
MOV 22H, #11111100B
MOV 23H, #10000000B
MOV 24H, #11111111B
MOV 25H, #10000000B
MOV 26H, #11111111B
MOV 27H, #11111111B

MOV R2, #00H
MOV R1, #20H

MOV R3, #07

LOOP:
MOV P3, R2
MOV A, @R1
MOV P0, A
INC R1
INC R2

DJNZ R3, LOOP



but then on the simulation the led matrix doesn't even turned on
what am i doing wrong and i should connect two led matrix and move the 2 words right and left could someone plz help me cause this project for the finale exam and i am really worried
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top