building a robot. - Electronic Circuits Projects Diagrams Free

bogdanfirst · 31st January 2003, 09:51 PM

i am interested in building a small robot. a bug or something like this, ir maybe even a larger and more complicated one, but i have no ideas. so some websited are great.
please send me your favourite website, containing a robot project, schematic and other things that might be useful. or if you have some ideas please share them!!!

bogdanfirst · 4th February 2003, 02:37 PM

come on, why doesnt anybody reply? i searched the net, but i dont have enough time, so please send me some interesting links!!!

pkshima · 4th February 2003, 06:05 PM

well i have been replying elsewhere bogdan 8) .

i m afraid i never found any good sites describing the mechanical setup of the robot. those who do a bit mention things that are not available easily.

most other sites mention 'autonomous' robots that use microcontrollers and stepper motors.
though some sites give good info on elctronic aspects. still none could satisfy me.

i personaly prefer using off the shelf items easily available anywhere in the world. thats the reason i always look for components used in
tape decks/floppy drives/cd drives etc.

so when designing my present robot, i decided to use the tape deck motor. beacuse of its great power and low price. then i needed a way to drive them so i searched for ICs that r used in the decks/VCRs for that
purpose. and thats how i discovered ba6209 and ba6238. i looked into its datasheet and found almost half of the schematic i needed.
i were to use 4 motors and thus needed 4X2 = 8 bits for the control of the robot.
looking at the nature of the bit patterns i actualy required led to the idea of using DTMF tones to transport 4 bits to the robot and decoding them there into 8 bits. i used CM8870 as the tone decoder and CD4555BE as the
4 to 8 bit decoder. the only thing required was to transport the tones wirelessly to the bot. i used commercialy available FM Rx module a simple 1 transistor FM Tx for that.

hope that helps.
mechanical design will b clear from the pics i will post.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

31st January 2003, 09:51 PM	(permalink)
bogdanfirst	building a robot. i am interested in building a small robot. a bug or something like this, ir maybe even a larger and more complicated one, but i have no ideas. so some websited are great. please send me your favourite website, containing a robot project, schematic and other things that might be useful. or if you have some ideas please share them!!!

4th February 2003, 02:37 PM	(permalink)
bogdanfirst	come on, why doesnt anybody reply? i searched the net, but i dont have enough time, so please send me some interesting links!!!

4th February 2003, 06:05 PM	(permalink)
pkshima	well i have been replying elsewhere bogdan 8) . i m afraid i never found any good sites describing the mechanical setup of the robot. those who do a bit mention things that are not available easily. most other sites mention 'autonomous' robots that use microcontrollers and stepper motors. though some sites give good info on elctronic aspects. still none could satisfy me. i personaly prefer using off the shelf items easily available anywhere in the world. thats the reason i always look for components used in tape decks/floppy drives/cd drives etc. so when designing my present robot, i decided to use the tape deck motor. beacuse of its great power and low price. then i needed a way to drive them so i searched for ICs that r used in the decks/VCRs for that purpose. and thats how i discovered ba6209 and ba6238. i looked into its datasheet and found almost half of the schematic i needed. i were to use 4 motors and thus needed 4X2 = 8 bits for the control of the robot. looking at the nature of the bit patterns i actualy required led to the idea of using DTMF tones to transport 4 bits to the robot and decoding them there into 8 bits. i used CM8870 as the tone decoder and CD4555BE as the 4 to 8 bit decoder. the only thing required was to transport the tones wirelessly to the bot. i used commercialy available FM Rx module a simple 1 transistor FM Tx for that. hope that helps. mechanical design will b clear from the pics i will post. __________________ Its not the Practice that makes a man perfect. Its the Man who makes the practice perfect ----- Pradeep K. Shima -----