Quote:
|
Originally Posted by Krumlink Building Walter and VETRA are 2 completely seprate things, althought both of them seem like they are the same project. VETRA is seprate from our C learning. VETRA is more like a personal project that uses what I learn from C. As for actually learning new C content, that is where Walter is coming in. I learn with Walter and apply it with VETRA. 
This is what I always do, I learn with one tool and use what i learn with another tool, a good example of this is worksheets/assignments you get in school. 
Walter will not take long to assemble, and I will use 2.4V with the Motors, since my Gearbox likes that voltage without squeeling too much. I will operate the circuity off a 9V battery (Alkaline to take into affect voltage) or a 8 pack of AAA/AA cell. |
Power walter with the 2 AA battery holders I provided. It is the same setup
as Bill used on Moongose but the Miss Motor H-Bridge is not nearly as efficent as chip used by mongoose. Wire it as I instructed. You can pick the speed/power you want with PWM.
You doing what you always do can be very frustrating.
8th April 2008, 06:03 PM
search engine for electronic parts
Linear Mode
