help please - Electronic Circuits Projects Diagrams Free

onetobe7998 · 26th September 2007, 01:33 PM

i want to build a r/c servo controler that will work through 100 foot cable cant use a radio signal need to hard wire

**Nigel Goodwin** · 26th September 2007, 01:58 PM

Use a radio link, that's how it's supposed to be used.

mneary · 2nd October 2007, 03:04 AM

There are a lot of "servo tester" designs that might be adapted to run on a long cable. Voltage loss on the power pins would be a problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

26th September 2007, 01:33 PM	(permalink (permalink))
onetobe7998	help please i want to build a r/c servo controler that will work through 100 foot cable cant use a radio signal need to hard wire Last edited by onetobe7998; 27th September 2007 at 04:55 PM.

26th September 2007, 01:58 PM	(permalink (permalink))
Nigel Goodwin	Use a radio link, that's how it's supposed to be used. __________________ PIC programmer software, and PIC Tutorials at: http://www.winpicprog.co.uk

2nd October 2007, 03:04 AM	(permalink (permalink))
mneary	There are a lot of "servo tester" designs that might be adapted to run on a long cable. Voltage loss on the power pins would be a problem.