i need help - Electronic Circuits Projects Diagrams Free

zakna · 18th September 2009, 12:25 AM

so i have this idea. the thing is i need help with it. the idea is using magnets to make energy. you will need a few very strong magnets and the theory is to take magnets and place them in to oposite rings mount 1 and have the other set on an axle. have this upright so the magnets can rotate freely, then attach a generator to the axle and have the rotating ring turn the genorator. will it work?

blueroomelectronics · 18th September 2009, 12:29 AM

Doesn't work. Study something else.

zakna · 18th September 2009, 12:32 AM

why not? iv tryd the rotating magnets and that works just fine? why cant some1 just attach a genorator to it?

birdman0_o · 18th September 2009, 01:22 AM

Even the magnets will eventually slow down as they are not a perfect system. There will be friction losses in the form of heat. If you attempt to remove energy from the system it will fall apart much faster.

If you disagree feel free to prove me wrong!

HarveyH42 · 18th September 2009, 02:18 AM

I saw something like that on YouTube, so it must work, sort of...

Don't remember the title though, but seemed realistic.

birdman0_o · 18th September 2009, 02:32 AM

Did you see the magician with the wand in the background of the video?

blueroomelectronics · 18th September 2009, 03:21 AM

This may help the OP
http://www.lhup.edu/~dsimanek/museum/unwork.htm

Mr RB · 18th September 2009, 07:55 AM

Great web site!

You can even use magnets to power your car...

"the powerful magnet causes the HHO molecule to become dissasociated at the resonant frequency of the... Anvil! ..." -Meyers

birdman0_o · 18th September 2009, 02:33 PM

Wow thats great!

blueroomelectronics · 18th September 2009, 02:35 PM

Quote:

Originally Posted by zakna

why not? iv tryd the rotating magnets and that works just fine? why cant some1 just attach a genorator to it?

Is it still spinning?

smanches · 18th September 2009, 09:40 PM

There was the art piece that some swedish guy made. It had a ball that rolled around a track. it would run for a couple weeks, but would eventually stop. Can't find it on youtube at the moment.

blueroomelectronics · 18th September 2009, 09:46 PM

The artists name is David Jones.
http://www.lhup.edu/~dsimanek/museum/art.htm

Mr RB · 19th September 2009, 05:00 AM

Yeah i've seen his work on the net, his art ALWAYS has structural tubing and "boxes"...

Not that i'm a cynic or anything...

mohammadmans · 19th September 2009, 06:43 AM

Hello
Who can help me!?
I interface an lcd (2*16) & ATMEGA8 in It's portB
I simulate my project by bascom & protuse software an be OK
IC port is ok too,
but after compile LCD don't show any thing.
I program my project to ATMEGA32 then LCD work correctly.
Why ATMEGA 8 don't work by lcd.
(SORRY MY BAD ENGLISH)

mneary · 19th September 2009, 11:13 AM

Quote:

Originally Posted by mohammadmans

Hello
Who can help me!?
I interface an lcd (2*16) & ATMEGA8 in It's portB
I simulate my project by bascom & protuse software an be OK
IC port is ok too,
but after compile LCD don't show any thing.
I program my project to ATMEGA32 then LCD work correctly.
Why ATMEGA 8 don't work by lcd.
(SORRY MY BAD ENGLISH)

You need stronger magnets.

Or maybe one of us is on the wrong thread.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

18th September 2009, 12:25 AM	#1
zakna	i need help so i have this idea. the thing is i need help with it. the idea is using magnets to make energy. you will need a few very strong magnets and the theory is to take magnets and place them in to oposite rings mount 1 and have the other set on an axle. have this upright so the magnets can rotate freely, then attach a generator to the axle and have the rotating ring turn the genorator. will it work?

18th September 2009, 12:29 AM	#2
blueroomelectronics	Doesn't work. Study something else. __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com/

18th September 2009, 12:32 AM	#3
zakna	why not? iv tryd the rotating magnets and that works just fine? why cant some1 just attach a genorator to it?

18th September 2009, 01:22 AM	#4
birdman0_o	Even the magnets will eventually slow down as they are not a perfect system. There will be friction losses in the form of heat. If you attempt to remove energy from the system it will fall apart much faster. If you disagree feel free to prove me wrong! __________________ Mike My website: www.ElectroBird.net

18th September 2009, 02:18 AM	#5
HarveyH42	I saw something like that on YouTube, so it must work, sort of... Don't remember the title though, but seemed realistic.

18th September 2009, 02:32 AM	#6
birdman0_o	Did you see the magician with the wand in the background of the video? __________________ Mike My website: www.ElectroBird.net

18th September 2009, 03:21 AM	#7
blueroomelectronics	This may help the OP http://www.lhup.edu/~dsimanek/museum/unwork.htm __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com/

18th September 2009, 07:55 AM	#8
Mr RB	Great web site! You can even use magnets to power your car... "the powerful magnet causes the HHO molecule to become dissasociated at the resonant frequency of the... Anvil! ..." -Meyers Attached Thumbnails

18th September 2009, 02:33 PM	#9
birdman0_o	Wow thats great! __________________ Mike My website: www.ElectroBird.net

18th September 2009, 09:40 PM	#11
smanches	There was the art piece that some swedish guy made. It had a ball that rolled around a track. it would run for a couple weeks, but would eventually stop. Can't find it on youtube at the moment.

18th September 2009, 09:46 PM	#12
blueroomelectronics	The artists name is David Jones. http://www.lhup.edu/~dsimanek/museum/art.htm __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com/

19th September 2009, 05:00 AM	#13
Mr RB	Yeah i've seen his work on the net, his art ALWAYS has structural tubing and "boxes"... Not that i'm a cynic or anything...

19th September 2009, 06:43 AM	#14
mohammadmans	Atmega8 <> Lcd Hello Who can help me!? I interface an lcd (2*16) & ATMEGA8 in It's portB I simulate my project by bascom & protuse software an be OK IC port is ok too, but after compile LCD don't show any thing. I program my project to ATMEGA32 then LCD work correctly. Why ATMEGA 8 don't work by lcd. (SORRY MY BAD ENGLISH)