We are working on a little project. reading temperature with a thermistor and displaying with a 7 segment led display. We want to use the 16F690 unless something else comes recommended and is cheap.

One function we are looking to do is force all lit segments to blink when a certain temp is met so as to give a warning. We could do this in several different variations I guess. Just curious if anyone has good experience programming this chip and could offer any resources for them? I will admit that we are green on PIC stuff so using this project as a learning tool..

Speak slowly.....lol

 

The thing about using a thermistor to find out temperature from an ADC is that you need a voltage divider, and the output is not linear, it is logarithmic. I would suggest using an lm35? or a ds18s20 instead. Probably the lm temp sensor.

__________________
Mike
My website: www.ElectroBird.net

 

The 16F690 is the chip Microchip supplies with their PICkit2 and low-count demo board, so many people have experience with it. It is a very solid uC, with plenty of pins to do the job and lots of features.

The data sheet is available on-line to assist you.

__________________
Creationists have a world of evidence