Help convert 12c508a file to 16F84 - Electronic Circuits Projects Diagrams Free

OY2L · 26th March 2008, 01:26 PM

I'am building this project http://users.tpg.com.au/users/talkin...honePage1.html and i need to convert this 12c508a file to 16F84, but i need some help for it, i have added the 16f84 include file and the phone number i need but some other changes need to be done, i need to use RB0 instead of GPO
RB1 instead of GP1
RB3 instead of GP3

OY2L

Hero999 · 26th March 2008, 02:27 PM

Can't you just use a 12F508, if you want flash?

House0Fwax · 26th March 2008, 02:38 PM

It's all mentioned on page 2 of the link you posted;
http://users.tpg.com.au/users/talkin...honePage2.html

Also on this page of the same site:
http://users.tpg.com.au/users/talking/10_Quirks.html

Pommie · 26th March 2008, 02:49 PM

That code is horribly written. Not a single variable anywhere and no config values. Hopefully it works with an 84 as advertised.

Mike.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar
Title	Starter	Forum	Replies	Latest
Programming HEX file with MPlab/Inchworm	gregmcc	Micro Controllers	4	27th April 2007 04:20 PM
Good Programing Techniques	Suraj143	Micro Controllers	5	27th April 2007 08:27 AM
How we can do it in Assembly..Help Needed	Ayne	Micro Controllers	37	29th December 2006 06:49 PM
HOW TO CONVERT HEXA TO DECIMAL FOR LCD, PLS HELP!!!!!!!!	AUNG THANT	Micro Controllers	3	10th April 2004 01:38 PM
how would i generate HEX file for multiple assembly files?	belinda_sg	Micro Controllers	2	30th March 2004 08:54 AM

26th March 2008, 02:27 PM	#2
Hero999	Can't you just use a 12F508, if you want flash? __________________ I do not answer private messages asking for help because no one else can: benefit from advice I may give or correct me if I'm wrong. Please ask on the open forum if you have a question and I'll be happy to help, if I know the answer.

26th March 2008, 02:38 PM	#3
House0Fwax	It's all mentioned on page 2 of the link you posted; http://users.tpg.com.au/users/talkin...honePage2.html Also on this page of the same site: http://users.tpg.com.au/users/talking/10_Quirks.html

26th March 2008, 02:49 PM	#4
Pommie	That code is horribly written. Not a single variable anywhere and no config values. Hopefully it works with an 84 as advertised. Mike.