T6963C Software Compatible with S1D13305 Graphic LCD - Electronic Circuits Projects Diagrams Free

baberjaved · 6th January 2008, 12:18 PM

How do I find out if a software written for T6963C Graphic LCD is compatible with S1D13305 if I make the appropriate connections?

**Nigel Goodwin** · 6th January 2008, 12:25 PM

Read the datasheets?.

baberjaved · 6th January 2008, 12:28 PM

The datasheets do not tell me how am I supposed to program the software for the LCD's.. I am so confused about it. I cannot find a single place where i can find the information about programming these Graphic LCD's (there are several available for Characters based LCD's but none for GLCDs)
Any article or book would help... If you know of any let me know...
I am tryin to drive S1D13305

**Nigel Goodwin** · 6th January 2008, 12:34 PM

The datasheets tell you exactly how you are supposed to program them?, you need to study them more - but unfortunately GLCD's aren't standard like text LCD's.

baberjaved · 6th January 2008, 05:36 PM

Ok let me ask a very basic question first
When we program Text-Based LCD's we move the cursor here and there and send ASCII Codes to be printed to the LCD... What do we send to the graphic LCDs Controller and how do we tell the cursor location etc?
A brief explanation would be helpful

blueroomelectronics · 6th January 2008, 06:19 PM

GLCDs have no character set built in. You have to draw them like any graphic.
http://www.geocities.com/dinceraydin/lcd/index.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Latest
Graphic LCD Library	baberjaved	Micro Controllers	1	28th December 2007 07:25 AM
Decent graphic LCD deal at BG Micro	futz	Micro Controllers	3	19th November 2007 12:10 AM
Graphic LCD	baberjaved	Micro Controllers	2	13th November 2007 04:00 PM
HD44780 lcd help	jay543_uk	Micro Controllers	12	8th November 2007 03:26 PM
Graphic LCD	flemmard	Micro Controllers	1	13th September 2007 02:32 AM

6th January 2008, 12:18 PM	(permalink)
baberjaved	T6963C Software Compatible with S1D13305 Graphic LCD How do I find out if a software written for T6963C Graphic LCD is compatible with S1D13305 if I make the appropriate connections?

6th January 2008, 12:25 PM	(permalink)
Nigel Goodwin	Read the datasheets?. __________________ PIC programmer software, and PIC Tutorials at: http://www.winpicprog.co.uk

6th January 2008, 12:28 PM	(permalink)
baberjaved	The datasheets do not tell me how am I supposed to program the software for the LCD's.. I am so confused about it. I cannot find a single place where i can find the information about programming these Graphic LCD's (there are several available for Characters based LCD's but none for GLCDs) Any article or book would help... If you know of any let me know... I am tryin to drive S1D13305

6th January 2008, 12:34 PM	(permalink)
Nigel Goodwin	The datasheets tell you exactly how you are supposed to program them?, you need to study them more - but unfortunately GLCD's aren't standard like text LCD's. __________________ PIC programmer software, and PIC Tutorials at: http://www.winpicprog.co.uk

6th January 2008, 05:36 PM	(permalink)
baberjaved	Ok let me ask a very basic question first When we program Text-Based LCD's we move the cursor here and there and send ASCII Codes to be printed to the LCD... What do we send to the graphic LCDs Controller and how do we tell the cursor location etc? A brief explanation would be helpful

6th January 2008, 06:19 PM	(permalink)
blueroomelectronics	GLCDs have no character set built in. You have to draw them like any graphic. http://www.geocities.com/dinceraydin/lcd/index.html __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com