LED Matrix and 16F876 Board - Electronic Circuits Projects Diagrams Free

OY2L · 15th November 2007, 06:30 PM

Finaly finished my LED Matrix board and 16F876 board after a little bit hard soldering job

**Nigel Goodwin** · 15th November 2007, 08:09 PM

Now that looks very familiar!

Takes a while soldering all those LED's doesn't it?.

Looking good though.

OY2L · 15th November 2007, 08:49 PM

Thanks Nigel, Yes and i did the LED matrix board over 2 or 3 weeks, all the track cuts the first day, some wirelinks one day and some another day and so on, and finaly all the led's the last two days. I have also built the one mainboard, one IRboard, keypad board, LCD board, Switch board and LED board,so far.

**Nigel Goodwin** · 15th November 2007, 09:01 PM

Oh! - I designed and built the board in a single afternoon!

Mind you, I've been soldering for a LONGGGGG! time!.

wschroeder · 15th November 2007, 11:43 PM

Since you guys are playing with an 8x8 LED matrix, I've got quite a few demos on YouTube that might be interesting. Mind you, you can connect directly to the PIC without limiting resistors, taking full advantage of the self-limiting FET's in the PIC output. All the 8x8 demos connect directly to 2 full Ports.

http://www.youtube.com/profile_videos?user=circuited

Here's a sample:

http://www.youtube.com/watch?v=jKh837LDQpc

Gayan Soyza · 16th November 2007, 03:46 AM

Nice work, I used the same technique which you do by adding jumpers on top of the vero board other than making messy in the underneath of the board.

I do this when I don’t have money to buy matrixes. I like home built led matrixes other than ready made ones.

OY2L · 16th November 2007, 01:16 PM

I just copied Nigel´s layout from his tutorial hardware page

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

15th November 2007, 06:30 PM	#1
OY2L	LED Matrix and 16F876 Board Finaly finished my LED Matrix board and 16F876 board after a little bit hard soldering job Attached Thumbnails

15th November 2007, 08:09 PM	#2
Nigel Goodwin	Now that looks very familiar! Takes a while soldering all those LED's doesn't it?. Looking good though. __________________ PIC programmer software, and PIC Tutorials at: http://www.winpicprog.co.uk

15th November 2007, 08:49 PM	#3
OY2L	Thanks Nigel, Yes and i did the LED matrix board over 2 or 3 weeks, all the track cuts the first day, some wirelinks one day and some another day and so on, and finaly all the led's the last two days. I have also built the one mainboard, one IRboard, keypad board, LCD board, Switch board and LED board,so far.

15th November 2007, 09:01 PM	#4
Nigel Goodwin	Oh! - I designed and built the board in a single afternoon! Mind you, I've been soldering for a LONGGGGG! time!. __________________ PIC programmer software, and PIC Tutorials at: http://www.winpicprog.co.uk

15th November 2007, 11:43 PM	#5
wschroeder	Since you guys are playing with an 8x8 LED matrix, I've got quite a few demos on YouTube that might be interesting. Mind you, you can connect directly to the PIC without limiting resistors, taking full advantage of the self-limiting FET's in the PIC output. All the 8x8 demos connect directly to 2 full Ports. http://www.youtube.com/profile_videos?user=circuited Here's a sample: http://www.youtube.com/watch?v=jKh837LDQpc

16th November 2007, 03:46 AM	#6
Gayan Soyza	Nice work, I used the same technique which you do by adding jumpers on top of the vero board other than making messy in the underneath of the board. I do this when I don’t have money to buy matrixes. I like home built led matrixes other than ready made ones. __________________ Gayan My Website http://gsmicro.blogspot.com/

16th November 2007, 01:16 PM	#7
OY2L	I just copied Nigel´s layout from his tutorial hardware page