rs-485 chip to PIC - Electronic Circuits Projects Diagrams Free

butters · 18th May 2009, 07:45 AM

where do i connect the wirings?

dougy83 · 18th May 2009, 07:53 AM

to the pins.

SPDCHK · 18th May 2009, 08:00 AM

Quote:

Originally Posted by dougy83

to the pins.

Sorry, but this deserves a 10 out of 10

dknguyen · 18th May 2009, 08:25 AM

You connect the RS-485 transceiver to the UART pins on the PIC.

3v0 · 18th May 2009, 08:40 AM

butters · 18th May 2009, 08:45 AM

Quote:

Originally Posted by dougy83

to the pins.

fine fine... let me be specific.. the converter has R+/D+ and R-/D- connections...

3v0 · 18th May 2009, 09:03 AM

With this sort of a question you need to provide a link to the datasheet for the part.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

18th May 2009, 07:45 AM	#1
butters	rs-485 chip to PIC where do i connect the wirings?

18th May 2009, 08:25 AM	#4
dknguyen	You connect the RS-485 transceiver to the UART pins on the PIC. __________________ Tanaka Sensei (avatar) says: Please spell it "ridiculous" correctly! Not "rediculous". ^^

18th May 2009, 08:40 AM	#5
3v0	You guys are sooo kind. Remember this http://www.embeddedsys.com/subpages/..._art_RS485.pdf __________________ Please post questions to the forums. PM's are for personal communication. BCHS/3v0's Tutorials Junebug USB PIC programmer kit., USB Bit Whacker, The 15 Minute Printed Circuit Board! (+drill time)

18th May 2009, 09:03 AM	#7
3v0	With this sort of a question you need to provide a link to the datasheet for the part. __________________ Please post questions to the forums. PM's are for personal communication. BCHS/3v0's Tutorials Junebug USB PIC programmer kit., USB Bit Whacker, The 15 Minute Printed Circuit Board! (+drill time)