Solution for photoresist - Electronic Circuits Projects Diagrams Free

shermaine · 8th March 2004, 03:22 PM

May i know the name for the solution to be used to remove photoresist?

spuffock · 8th March 2004, 04:06 PM

Acetone used to work pretty well

Russlk · 8th March 2004, 04:24 PM

Different systems require different solutions. Request the name from the supplier, I believe they are required to tell you.

pike · 9th March 2004, 05:19 AM

I have been told that soda ash works quite well in the right strength. you can get this stuff at your pool chemicals suppliers.

Hivolt · 9th March 2004, 05:49 AM

A number of things can be used, The old developer you used can work if you let the board sit for 5- 10 minutes ( warmer works faster), or a bit of full strength (undiluted) developer on paper towel, wipe it on and let sit for a minute, then rinse. A number of sovents like acetone, carburator cleaner, auto paint reducer. Or just buy the actual resist thinner from the resist manufacturer.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

8th March 2004, 03:22 PM	(permalink)
shermaine	Solution for photoresist May i know the name for the solution to be used to remove photoresist?

8th March 2004, 04:06 PM	(permalink)
spuffock	Acetone used to work pretty well

8th March 2004, 04:24 PM	(permalink)
Russlk	Different systems require different solutions. Request the name from the supplier, I believe they are required to tell you. __________________ see my website: www.geocities.com/russlk

9th March 2004, 05:19 AM	(permalink)
pike	I have been told that soda ash works quite well in the right strength. you can get this stuff at your pool chemicals suppliers. __________________ www.winpicprog.co.uk - Great PIC language tutorials.

9th March 2004, 05:49 AM	(permalink)
Hivolt	A number of things can be used, The old developer you used can work if you let the board sit for 5- 10 minutes ( warmer works faster), or a bit of full strength (undiluted) developer on paper towel, wipe it on and let sit for a minute, then rinse. A number of sovents like acetone, carburator cleaner, auto paint reducer. Or just buy the actual resist thinner from the resist manufacturer.