Digital Readout for load cell - Electronic Circuits Projects Diagrams Free

hhc11 · 2nd March 2004, 07:49 PM

I am in the process of building a device to check coil springs, I have the mechanical part figured out, I am using a 5000 lb rated load cell, I need
to build or buy a digital readout for it.
The specs on the load cell are: 15V DC Max Input
1.5MV/V output @ 2000 Lbs

Any Help would be greatly appreciated.

Thanks, Larry

Russlk · 2nd March 2004, 11:17 PM

You will need a 4 1/2 digit display in order to read 5000 on a display that goes to 19999. The attached circuit should do what you want.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2nd March 2004, 07:49 PM	(permalink)
hhc11	Digital Readout for load cell I am in the process of building a device to check coil springs, I have the mechanical part figured out, I am using a 5000 lb rated load cell, I need to build or buy a digital readout for it. The specs on the load cell are: 15V DC Max Input 1.5MV/V output @ 2000 Lbs Any Help would be greatly appreciated. Thanks, Larry