Trusted PCB printing company? - Electronic Circuits Projects Diagrams Free

leaferz · 14th November 2007, 01:36 AM

Are there any trusted websites out there who will make pcb boards for me that people have used here?

I have all the Gerber files and PCB boards printing schematics. I would attempt it myself but they are multileveled boards.I have three projects that I'm finally getting around to.

Any suggestions?

Thx everyone

RadioRon · 14th November 2007, 01:42 AM

I have used the Electro Tech sponsor that we often see in the banner at the top of this page, the one that says "China PCB Low cost". ALthough they need more than a week to make your boards, they do a good job, use quality shipping, and their prices are very good. I used their tech support one time and that worked well too. I would use them again for my next project.

leaferz · 14th November 2007, 01:50 AM

Quote:

Originally Posted by RadioRon

I have used the Electro Tech sponsor that we often see in the banner at the top of this page, the one that says "China PCB Low cost". ALthough they need more than a week to make your boards, they do a good job, use quality shipping, and their prices are very good. I used their tech support one time and that worked well too. I would use them again for my next project.

Thx for the quick response RR.

I have adblock on so I missed the ad.

I'll check out their website.

tboydva · 14th November 2007, 11:43 AM

Perhaps this isn't suitable for importing your files, but expressPCB has a miniboard service (I think 3.8 X 2.5") with dual layers for ~$60 shipped. I've had several designs made (work and hobby) and have been happy.

Optikon · 14th November 2007, 04:35 PM

Advanced circuits is very professional.

They even have a free DFM website that will check your files to make sure they can be manufactured.

Boncuk · 15th November 2007, 12:00 AM

Try bilex-lp.bu. They make good quality boards - also prototyping - for approx. 60% of the usual price. Gerber files are not required. You can send your board files. (No multilayer boards)

mneary · 15th November 2007, 02:49 AM

www.bilex-lp.com ? No luck for bilex-lp.bu.

At bilex-lp.com, they're in German and offer French, Italian, and English pages. But they are all 404.

felis · 19th November 2007, 12:38 AM

I'm using batchpcb.com for prototypes. The turn-around is slow as hell (~3 weeks); the price, however, is quite attractive - $2.5/sq.in +$10 setup for 2-layer with soldermask and silkscreens on both sides. 8mil traces.

They have a very nice DRC bot. Also, they started taking 4-layer orders recently.

Boncuk · 19th November 2007, 08:49 AM

Here is another offer I received today.

pcbcart.com offered double sided boards for a very low price too. An 11.59inch/sq board, double sided, solder stop both sides and silk screen one side, FR4, 1.6mm is US$ 0.558 per piece + tooling of 55.09 for 10 boards and a lead time of 8 days.

14th November 2007, 01:36 AM	(permalink)
leaferz New Member	Trusted PCB printing company? Are there any trusted websites out there who will make pcb boards for me that people have used here? I have all the Gerber files and PCB boards printing schematics. I would attempt it myself but they are multileveled boards.I have three projects that I'm finally getting around to. Any suggestions? Thx everyone

14th November 2007, 01:42 AM	(permalink)
RadioRon Experienced Member	I have used the Electro Tech sponsor that we often see in the banner at the top of this page, the one that says "China PCB Low cost". ALthough they need more than a week to make your boards, they do a good job, use quality shipping, and their prices are very good. I used their tech support one time and that worked well too. I would use them again for my next project. __________________ RadioRon

19th November 2007, 08:49 AM	(permalink)
Boncuk Experienced Member	Trusted PCB manufacturer Here is another offer I received today. pcbcart.com offered double sided boards for a very low price too. An 11.59inch/sq board, double sided, solder stop both sides and silk screen one side, FR4, 1.6mm is US$ 0.558 per piece + tooling of 55.09 for 10 boards and a lead time of 8 days.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Latest
PCB layout help	dbtoutfit	Electronic Projects Design/Ideas/Reviews	26	19th April 2008 03:16 AM
Printing pcb layouts?	1Steveo	General Electronics Chat	8	18th March 2008 04:24 PM
Test Pilots wanted, Mech building company	MechaPS	Robotics Chat	26	22nd September 2007 08:20 AM
Looking for a Electric Board Repair Company	Slate	General Electronics Chat	4	4th January 2007 02:53 PM
PCB printing services	Exo	General Electronics Chat	7	3rd January 2004 12:49 PM

14th November 2007, 11:43 AM	(permalink)
tboydva New Member	Perhaps this isn't suitable for importing your files, but expressPCB has a miniboard service (I think 3.8 X 2.5") with dual layers for ~$60 shipped. I've had several designs made (work and hobby) and have been happy.

14th November 2007, 04:35 PM	(permalink)
Optikon Experienced Member	Advanced circuits is very professional. They even have a free DFM website that will check your files to make sure they can be manufactured.

15th November 2007, 12:00 AM	(permalink)
Boncuk Experienced Member	Try bilex-lp.bu. They make good quality boards - also prototyping - for approx. 60% of the usual price. Gerber files are not required. You can send your board files. (No multilayer boards)

15th November 2007, 02:49 AM	(permalink)
mneary Experienced Member	www.bilex-lp.com ? No luck for bilex-lp.bu. At bilex-lp.com, they're in German and offer French, Italian, and English pages. But they are all 404.

19th November 2007, 12:38 AM	(permalink)
felis Experienced Member	I'm using batchpcb.com for prototypes. The turn-around is slow as hell (~3 weeks); the price, however, is quite attractive - $2.5/sq.in +$10 setup for 2-layer with soldermask and silkscreens on both sides. 8mil traces. They have a very nice DRC bot. Also, they started taking 4-layer orders recently.