|
|
|
|
|
 |
 |
 |
 |
|
|||||||
| General Electronics Chat This forum is for general chat about electronics, eg: Dont know what a part does? Dont know how to read a circuit? Want to get an opinion? |
 |
|
|
Thread Tools | Display Modes |
11th July 2007, 06:59 PM
|
(permalink) |
Armada M700 LCD interface questions.
I recentally received a working Compaq Armada M700 LCD screen. I'm wanting to find a way to interface to it. It has three connectors.
1 - 2 pin connector seems like it could be for power for back light? pin 1 Red pin 2 Black 1 - 6 pin connector could this be the brightness controller? pin 1 Red pin 2 Orange pin 3 Green pin 4 Yellow pin 5 Brown pin 6 Black 1 - 30 pin connector XVGA signal maybe? pin 1 Empty pin 2 Black pin 3 Empty pin 4 Brown pin 5 White/Black stripe pin 6 Empty pin 7 Empty pin 8 Empty pin 9 Empty pin 10 White/Black stripe pin 11 Red pin 12 Orange pin 13 Yellow pin 14 Green pin 15 Blue pin 16 Violet pin 17 Grey pin 18 White pin 19 White/Black stripe pin 20 Brown/White stripe pin 21 Empty pin 22 Empty pin 23 Empty pin 24 Empty pin 25 Empty pin 26 Empty pin 27 Empty pin 28 Empty pin 29 Red/White stripe pin 30 Orange/Black stripe Any information would be a great help. I've been all over google looking for m700 lcd schmatics and not finding much i might be searching for the wrong name. But a pre thank you to any who reply. |
|
|
|
|
11th July 2007, 09:11 PM
|
(permalink) |
|
Interfacing a laptop lcd is a lost cause.
__________________
There is no "I" in "team", unless Apple makes it... Then it would be iTeam. |
|
|
|
|
|
12th July 2007, 01:25 AM
|
(permalink) |
|
Well maybe interfacing was the wrong terminology. I believe that the right word i'm looking for is a pin out. I'm not trying to make it useable by microcontroller i'm using a micro at board it's 8in x 8in and boots off usb thumb drives or the like. I would like to be able to connect it to a power supply and a vga port off the main board. Similiar to http://global.msi.com.tw/index.php?f...aincat_no=388#maincat_no=388# ( can't seem to find the link to the one that I chose. The application is still the same as it's intention. But thank you for your responss
|
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Latest |
| lcd interface to PIC16F877 | ahseerhsg | Electronic Projects Design/Ideas/Reviews | 0 | 11th June 2007 04:39 PM |
| Help understanding the Unicorn | Kyle-s4h | Micro Controllers | 2 | 5th June 2007 06:08 PM |
| PIC16+Parallel lcd - by twitchy | Nigel Goodwin | Micro Controllers | 16 | 18th May 2007 10:44 AM |
| 89c4051 4-bit controlled LCD sporadic screwup | Pax Writer | Micro Controllers | 7 | 26th April 2007 05:58 AM |
| interfacing ADC0808 with 89C51 | mnoman | Micro Controllers | 20 | 10th April 2007 12:57 PM |
Linear Mode
