Transmitter and reciver for 433Mhz - Electronic Circuits Projects Diagrams Free

Mullemeck · 10th August 2003, 11:52 PM

Hi!

Does anyone have a schematic for a transmitter an a reciver that operates in 433mhz

thx

daviddoria · 11th August 2003, 03:08 AM

i dont know your skill level, but i could never get a rx/tx system on ANY frequency to work lol

**kinjalgp** · 11th August 2003, 10:25 AM

Instead of building one, get the ready made modules. It will reduce a lot of your design and testing time.

Mullemeck · 11th August 2003, 10:52 AM

okay if it's that hard i guess it might even be cheaper to buy the modules.

thanks anyway

**kinjalgp** · 12th August 2003, 05:34 AM

Yes, you'll find ready RF modules quite cheaper than building one using discrete components. See www.rentron.com for schematics based on these RF modules.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10th August 2003, 11:52 PM	(permalink)
Mullemeck	Transmitter and reciver for 433Mhz Hi! Does anyone have a schematic for a transmitter an a reciver that operates in 433mhz thx

11th August 2003, 03:08 AM	(permalink)
daviddoria	i dont know your skill level, but i could never get a rx/tx system on ANY frequency to work lol __________________ thanks, david

11th August 2003, 10:25 AM	(permalink)
kinjalgp	Instead of building one, get the ready made modules. It will reduce a lot of your design and testing time. __________________ "There is no way to peace, peace is the way!"

11th August 2003, 10:52 AM	(permalink)
Mullemeck	okay if it's that hard i guess it might even be cheaper to buy the modules. thanks anyway

12th August 2003, 05:34 AM	(permalink)
kinjalgp	Yes, you'll find ready RF modules quite cheaper than building one using discrete components. See www.rentron.com for schematics based on these RF modules. __________________ "There is no way to peace, peace is the way!"