Electronic Projects, forums and more.

Go Back   Electronic Circuits Projects Diagrams Free > Electronics Forums > General Electronics Chat


General Electronics Chat This forum is for general chat about electronics, eg: Dont know what a part does? Dont know how to read a circuit? Want to get an opinion?

Reply
 
LinkBack Thread Tools Display Modes
Old 16th March 2006, 05:23 PM   (permalink)
Default after 3 years i am once again back for help!please help me!

hai to every one
3years back i asked for a timer 4546 cmos i got help from u

the time i designed worked in alternate on /off every 15 min.

right now i like to know with this same ic 4546 will i be able to make it switch of after 8 hours .same time it has to work on/ 15 min off/ 15 min. alternately.

will it be done with a single ic.

the power supply is a transformerless one.

please guide me

thank u

ambrose is offline  
Old 16th March 2006, 06:39 PM   (permalink)
Default Re: after 3 years i am once again back for help!please help

Quote:
Originally Posted by ambrose
hai to every one
3years back i asked for a timer 4546 cmos i got help from u

the time i designed worked in alternate on /off every 15 min.

right now i like to know with this same ic 4546 will i be able to make it switch of after 8 hours .same time it has to work on/ 15 min off/ 15 min. alternately.

will it be done with a single ic.

the power supply is a transformerless one.

please guide me

thank u
As far as I can tell, there is no 4546 timer. Did you use the wrong part number?
__________________
Ron

Roff is offline  
Old 16th March 2006, 09:48 PM   (permalink)
Default

I Believe you mean a 4541.

There is a Construction Article on this timer in my Projects Page on my site.
__________________
I No Longer accept Private Messages on here.
All Emails to me Must Contain the Word \"Electronic\" in the \"Subject Line\"
or they go Directly to my Junk Mail Folder.
Email me at: chemelec@hotmail.com
Website: http://www3.telus.net/chemelec
chemelec is offline  
Old 17th March 2006, 01:42 AM   (permalink)
Default

Another possibility is MC14536B, a 24 stage ripple binary counter with 16 stages selectable with a binary code. Mouser carries the HCF4536BEY for 86 cents.
__________________
see my website: www.geocities.com/russlk
Russlk is offline  
Old 17th March 2006, 06:08 PM   (permalink)
Default sir hope u know me,another exciting thing

thank u chemlec

u are right,it is 4541,i typed wrongly.hope i will get a working circuit from u.

another exciting thing is, the man u guided me in this timer project with a complete circuit ,and constantly replyed me through e-mail.once again
standing frist to help me .

Russell Kincaid, sir hope u know me thanks once again.i am back to trouble u with querries.

till than i will check out what u said
thanks both of u
__________________
life is not a problem to solve ,but an adventure to face
ambrose is offline  
Old 17th March 2006, 10:18 PM   (permalink)
Default Re: after 3 years i am once again back for help!please help

Quote:
Originally Posted by ambrose
will i be able to make it switch of after 8 hours .same time it has to work on/ 15 min off/ 15 min. alternately.

will it be done with a single ic.
It can probably be done with 2 555's or 2 7555's, but I know nothing about the chip you specified.
__________________
-=: The best low-priced components to troubleshoot with are the speaker and the LED :=-
mstechca is offline  
Old 18th March 2006, 12:57 AM   (permalink)
Default Re: after 3 years i am once again back for help!please help

Quote:
Originally Posted by mstechca
Quote:
Originally Posted by ambrose
will i be able to make it switch of after 8 hours .same time it has to work on/ 15 min off/ 15 min. alternately.

will it be done with a single ic.
It can probably be done with 2 555's or 2 7555's, but I know nothing about the chip you specified.
mstechca, The CD4541, You should check it out.
"Milli-Seconds to Hundreds of hours of timing".
__________________
I No Longer accept Private Messages on here.
All Emails to me Must Contain the Word \"Electronic\" in the \"Subject Line\"
or they go Directly to my Junk Mail Folder.
Email me at: chemelec@hotmail.com
Website: http://www3.telus.net/chemelec
chemelec is offline  
Old 18th March 2006, 01:47 AM   (permalink)
Default

The 4541 won't do what you want, but the 4521 will, see below. I have not tried this but think it will work. When Q24 goes high, the clock stops but the counter is not reset. You have to press the reset button to make it go again.
Attached Images
File Type: gif 8_hour_timer.gif (12.3 KB, 510 views)
__________________
see my website: www.geocities.com/russlk
Russlk is offline  
Old 18th March 2006, 02:40 AM   (permalink)
Default

Two of the 4541's will do what he wants.

One as a one time for 8 hours , cycling the other one at 15 minute cycles.
__________________
I No Longer accept Private Messages on here.
All Emails to me Must Contain the Word \"Electronic\" in the \"Subject Line\"
or they go Directly to my Junk Mail Folder.
Email me at: chemelec@hotmail.com
Website: http://www3.telus.net/chemelec
chemelec is offline  
Old 18th March 2006, 12:55 PM   (permalink)
Default i want to do it in one ic the idea is to make it cheap

The reason i made this timer is to run a liquid musquito repelent device in alternate on /off timing so that it saves more liquid.

two years back itself i got the circuit from u .but one of the leading company in india came with the same idea and released recently.when i opened the device i was amazed to see the same dicto of what i did.

their idea is to switch of after 8 hrs of sleep.

what i want to do is combine 15 min cycle and 8 hrs of working.

because i always forget to switch it off in the morning.

has i have already told i am a business management guy, i am only a electronics admirer.i want to do many things but i am not specialized so when ever i come up with some crazy ideas i always contact specialised people LIKE U ALL.i am just a assembler of circuit.so i need u all teach me like a baby.

but i am a quick learner i proved it by designing a timer by getting help from u all.

thanks sir for the circuit,but the manual reset is only bothering me.

will come with more querries.

ambrose
__________________
life is not a problem to solve ,but an adventure to face
ambrose is offline  
Old 18th March 2006, 03:00 PM   (permalink)
Default

If you want "State of the Art" Electronics, Probably someone could do this using a Progeammed, PIC or a Microprocessor Chip.

It would be a Much smaller circuit.

But I don't do digital stuff.
__________________
I No Longer accept Private Messages on here.
All Emails to me Must Contain the Word \"Electronic\" in the \"Subject Line\"
or they go Directly to my Junk Mail Folder.
Email me at: chemelec@hotmail.com
Website: http://www3.telus.net/chemelec
chemelec is offline  
Old 18th March 2006, 06:57 PM   (permalink)
Default

Do I understand that you want it to automatically start up again after some time?
__________________
see my website: www.geocities.com/russlk
Russlk is offline  
Old 18th March 2006, 07:19 PM   (permalink)
Default what is this pic programable ic

another dum question

what is this pic is is same as micro controller

what program we have to know for PIC and how to do it.is it cheaper than normal ic

the main idea of me doing is i want to say to people that i made the cheapest timer.and also its really great when u see something come to life
by ur own hand, we feel like GOD.u know that .thats why i like electronics.
__________________
life is not a problem to solve ,but an adventure to face
ambrose is offline  
Old 18th March 2006, 08:41 PM   (permalink)
Default Re: what is this pic programable ic

Quote:
Originally Posted by ambrose
another dum question

what is this pic is is same as micro controller
A PIC is the most popular micro-controller, for your application only a small 8 pin one (or even 6 pin SM) is all that would be required.
__________________
PIC programmer software, and PIC Tutorials at:
http://www.winpicprog.co.uk
Nigel Goodwin is offline  
Old 23rd March 2006, 06:56 PM   (permalink)
Default thank u for now

thank u all for the ideas
right now i am working on the abow design which mr rusllk gave .

i will come back if i get struck.
__________________
life is not a problem to solve ,but an adventure to face
ambrose is offline  
Reply

Bookmarks

Thread Tools
Display Modes





All times are GMT. The time now is 10:21 AM.


Electronic Circuits  |  Learning Electronics
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.

eXTReMe Tracker