DC morot caps - Electronic Circuits Projects Diagrams Free

bloody-orc · 6th March 2006, 04:39 PM

Hi. a quicy:
At what rate caps shoud i use for the caps that are connected triagonally to the motor 2 pins? is it 0.1uF? i just cant remember that anymore.
Thanks a bunch.

Styx · 6th March 2006, 04:57 PM

Quote:

Originally Posted by bloody-orc

Hi. a quicy:
At what rate caps shoud i use for the caps that are connected triagonally to the motor 2 pins? is it 0.1uF? i just cant remember that anymore.
Thanks a bunch.

:shock:

errr could you try a bit more fluid english with some info abt the machine

bloody-orc · 6th March 2006, 05:02 PM

k i found what i needed. i needed to put some caps to eliminate at least some of the EMF they make. 1 across the leads and 2 from lead to GND (1 for each pin).

100nF betwean the leads and 1-10uF from pin to GND

Sry if my english is too bad. also my keyboard plays tricks on me. it sometimes leave out some letters and adds some that are not reuired. :evil:

Thanks for you consurne though.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

6th March 2006, 04:39 PM	(permalink)
bloody-orc	DC morot caps Hi. a quicy: At what rate caps shoud i use for the caps that are connected triagonally to the motor 2 pins? is it 0.1uF? i just cant remember that anymore. Thanks a bunch. __________________ Need Help? Press F1 If that doesn\'t help you, ask me... I might know better.

6th March 2006, 05:02 PM	(permalink)
bloody-orc	k i found what i needed. i needed to put some caps to eliminate at least some of the EMF they make. 1 across the leads and 2 from lead to GND (1 for each pin). 100nF betwean the leads and 1-10uF from pin to GND Sry if my english is too bad. also my keyboard plays tricks on me. it sometimes leave out some letters and adds some that are not reuired. :evil: Thanks for you consurne though. __________________ Need Help? Press F1 If that doesn\'t help you, ask me... I might know better.