New website ( Robot and Electronics Site ) - Electronic Circuits Projects Diagrams Free

Kingpin094 · 23rd November 2005, 05:21 PM

Just got done posting my website. Thought the ETO crowd might like
some of the projects and info.

www.robotdungeon.com

Let me know if you have any comments.

kingpin094

Megamox · 23rd November 2005, 05:35 PM

aww man i wanted to see that clock working

Looks good!!

Megamox

Kingpin094 · 25th November 2005, 03:27 PM

Hopefully I will get around to finishing that Propeller Clock. I had a full
Prototype working but the air core transformer just need way to much
power to get enough juice to run the blade. I chnage somethings around
and did a new PCB for it I just need to make it and put it back together.

Thanks for the interest.
kingpin094

MrMikey83 · 25th November 2005, 07:34 PM

So your Prop clock spins laterally?
I guess thats best for a number display or even text.

The one I am working on spins vertically so that if all LED's are on, it makes a disk in the air. If I ever get back to work on it, It has about 20 RGB LED's and two lines wired for text output. It should be really cool when done, I just need to get back to it. The fan motor I had it on decided not to spin freely anymore after I stupidly took it apart so now I need to go buy a new fan or use a different motor.
~Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

23rd November 2005, 05:21 PM	(permalink)
Kingpin094	New website ( Robot and Electronics Site ) Just got done posting my website. Thought the ETO crowd might like some of the projects and info. www.robotdungeon.com Let me know if you have any comments. kingpin094 __________________ Dude, no way!!!!

23rd November 2005, 05:35 PM	(permalink)
Megamox	aww man i wanted to see that clock working Looks good!! Megamox

25th November 2005, 03:27 PM	(permalink)
Kingpin094	Hopefully I will get around to finishing that Propeller Clock. I had a full Prototype working but the air core transformer just need way to much power to get enough juice to run the blade. I chnage somethings around and did a new PCB for it I just need to make it and put it back together. Thanks for the interest. kingpin094 __________________ Dude, no way!!!!

25th November 2005, 07:34 PM	(permalink)
MrMikey83	So your Prop clock spins laterally? I guess thats best for a number display or even text. The one I am working on spins vertically so that if all LED's are on, it makes a disk in the air. If I ever get back to work on it, It has about 20 RGB LED's and two lines wired for text output. It should be really cool when done, I just need to get back to it. The fan motor I had it on decided not to spin freely anymore after I stupidly took it apart so now I need to go buy a new fan or use a different motor. ~Mike __________________ All Electronic components run on smoke. Let the smoke out and it no longer works. ~Tim Baker (Electronics Instructor at John A. Logan College)