ahhhh...I see...or else I would have to have the gate of M1 very high.

Now how comes when the invertor would turn m1 off and m2 on that m2 would become very hot and burn up?

Thanks,
Bob

 

Have you built the circuit I posted, or are you still asking about your schematic? If you're talking about your schematic, I need to see ALL values on the schematic - Inverter part number, transistor part numbers, load resistance value, battery voltages, and anything else that is relevant, before I can answer your question.
If you build my circuit, M2 won't get hot and burn up unless your load resistance is too low for the transistors to handle.