Guys this is my home made 2.1 Home Theater System - Electronic Circuits Projects Diagrams Free

pasanlaksiri · 15th February 2008, 06:19 PM

Guys this is my home made 2.1 Home Theater System

Subwoofer out - 100W ( I used Sanken Power Transistors )

Left and Right Speaker out - 40W X 2 ( TDA 2050 )

LCD is HD44780 Based 20 X 4 Character LCD ( I connect it to PC via LPT )

I also so built a Remote Controller for my amp using PIC chips. It can controle Volume and On / Off. Volume is mechanically controlled. u can see it in video

Here r some photos ( Click to View Hiquality Images )

This is the Subwoofer ( Click to View Hiquality Images )

Here r some photos about its LCD ( Click on thumb nails to view Hiquality images )

This is the Remote Controller ( Click on thumb nails to view Hiquality images )

CLICK HERE FOR YOU TUBE VIDEO

Comments Needed

blueroomelectronics · 15th February 2008, 06:28 PM

Wow, nice work. All point to point too. The LED in the volume control is a nice touch too.

pasanlaksiri · 15th February 2008, 06:30 PM

Quote:

Originally Posted by blueroomelectronics

Wow, nice work. All point to point too. The LED in the volume control is a nice touch too.

Thank you

RadioRon · 15th February 2008, 07:34 PM

I am very impressed with the results of your project. Your construction is very tidy and professional looking. It appears as though you've used a motorized volume control, which is very nice. What music will you play through this system, or perhaps I should ask, what will your favorite movies be for this system?

**Nigel Goodwin** · 15th February 2008, 09:13 PM

As they say, it's very nice, but it's not Home Theatre, it's just a stereo with a sub-woofer - Home Theatre has to be more than stereo.

BeeBop · 16th February 2008, 12:33 AM

WOW! Looks great!

pasanlaksiri · 16th February 2008, 02:18 AM

Quote:

Originally Posted by Nigel Goodwin

As they say, it's very nice, but it's not Home Theatre, it's just a stereo with a sub-woofer - Home Theatre has to be more than stereo.

Quote:

but it's not Home Theatre

Yes. but next time im going to make a 4.1 or 5.1 System.

This is my first project with perspex. I didn't plan well cct positions. Thats y its inside is looks like a hell.

pasanlaksiri · 16th February 2008, 02:20 AM

Quote:

Originally Posted by RadioRon

I am very impressed with the results of your project. Your construction is very tidy and professional looking. It appears as though you've used a motorized volume control, which is very nice. What music will you play through this system, or perhaps I should ask, what will your favorite movies be for this system?

Normally im much more a classic music guy. But I watch all kind of movies.

pasanlaksiri · 16th February 2008, 02:21 AM

Quote:

Originally Posted by BeeBop

WOW! Looks great!

Thank you

Marks256 · 16th February 2008, 03:35 AM

WOW!

that does look awesome!

+rep

Torben · 16th February 2008, 08:20 AM

Yep, that's pretty cool and looks great.

I'd say it definitely qualifies as "home theatre"--or at least, as more than just a stereo. Most stereos don't have dual CPUs and hard drives.

Anyway, good work!

Torben

pasanlaksiri · 16th February 2008, 08:25 AM

Now im planing for PC Cassing. With all the options that i need.

Like these

1) SSD Temp meters
2) External Power Jacks for my projects
3) Some Some Others. I cant remember now.

pasanlaksiri · 16th February 2008, 08:26 AM

Quote:

Originally Posted by Marks256

WOW!

that does look awesome!

+rep

Ur Shocked

. Yes its inside is looks like a hell to me. Coz of very bad planning

simrantogether · 16th February 2008, 12:36 PM

What Does 2.1 Means...

Regards,

Simran..

pasanlaksiri · 16th February 2008, 12:46 PM

Quote:

Originally Posted by simrantogether

What Does 2.1 Means...

Regards,

Simran..

Left Right Subwoofer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar
Title	Starter	Forum	Replies	Latest
Home made PCB's	markland556	General Electronics Chat	27	22nd February 2008 03:31 PM
Best home made security circuit	flemmard	General Electronics Chat	6	11th September 2007 08:04 PM
Home made PCB:ferric chloride concentration	darvaish	General Electronics Chat	2	14th March 2005 03:08 PM
home made etching tank..what u think	theboss	Electronic Projects Design/Ideas/Reviews	2	12th April 2004 06:52 PM
HOME ALARM SYSTEM ?	SMA_Electronics	Electronic Projects Design/Ideas/Reviews	2	22nd February 2003 08:14 PM

15th February 2008, 06:19 PM	#1
pasanlaksiri	Guys this is my home made 2.1 Home Theater System Guys this is my home made 2.1 Home Theater System Subwoofer out - 100W ( I used Sanken Power Transistors ) Left and Right Speaker out - 40W X 2 ( TDA 2050 ) LCD is HD44780 Based 20 X 4 Character LCD ( I connect it to PC via LPT ) I also so built a Remote Controller for my amp using PIC chips. It can controle Volume and On / Off. Volume is mechanically controlled. u can see it in video Here r some photos ( Click to View Hiquality Images ) This is the Subwoofer ( Click to View Hiquality Images ) Here r some photos about its LCD ( Click on thumb nails to view Hiquality images ) This is the Remote Controller ( Click on thumb nails to view Hiquality images ) CLICK HERE FOR YOU TUBE VIDEO Comments Needed __________________ Pasan...

15th February 2008, 06:28 PM	#2
blueroomelectronics	Wow, nice work. All point to point too. The LED in the volume control is a nice touch too. __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com/

15th February 2008, 07:34 PM	#4
RadioRon	I am very impressed with the results of your project. Your construction is very tidy and professional looking. It appears as though you've used a motorized volume control, which is very nice. What music will you play through this system, or perhaps I should ask, what will your favorite movies be for this system? __________________ RadioRon

15th February 2008, 09:13 PM	#5
Nigel Goodwin	As they say, it's very nice, but it's not Home Theatre, it's just a stereo with a sub-woofer - Home Theatre has to be more than stereo. __________________ PIC programmer software, and PIC Tutorials at: http://www.winpicprog.co.uk

16th February 2008, 03:35 AM	#10
Marks256	WOW! that does look awesome! +rep __________________ There is no "I" in "team", unless Apple makes it... Then it would be iTeam.

16th February 2008, 08:20 AM	#11
Torben	Yep, that's pretty cool and looks great. I'd say it definitely qualifies as "home theatre"--or at least, as more than just a stereo. Most stereos don't have dual CPUs and hard drives. Anyway, good work! Torben

16th February 2008, 08:25 AM	#12
pasanlaksiri	Now im planing for PC Cassing. With all the options that i need. Like these 1) SSD Temp meters 2) External Power Jacks for my projects 3) Some Some Others. I cant remember now. __________________ Pasan...

16th February 2008, 12:36 PM	#14
simrantogether	.1 What Does 2.1 Means... Regards, Simran.. __________________ Simran.. 8051 Specialist..