rohans

I have a unique electronics project that I need some assistance with, are there any of you in an around London that would take on some sort of consultancy role with my project. The design is something being prepared for the royal family.

It surrounds computer hardware, PCB design, GPS, RF ID, Batteries amongst others.

Any help or recomendations would be much appriciated.

Thanks,

Rohan.

HiTech

you're not going to install flashing, tri-color l.e.d.s amongst the Crown Jewels, are you? The Royal Family? If I were to assist you, would I then be knighted by the Queen herself in trade for my efforts?

__________________
Don't make me reach through this monitor to slap you a good one!

rohans

HiTech, might be some white LEDs somewhere but not amongst the Crown Jewels though, doesn't really go and so 2005!! I doubt you'll be knighted by the Queen but I see if you'll be able to to get a by appointment logo if you're good!

Any serious takers?

mramos1

Nope. I am in the States.. And if I was there I would not do it for a logo (yet I do not have one ), maybe a subscription to the Sun.

And I still like the blue LEDs myself?

The Queen know you are up to this?

What are you tring to do, as there are many talents on many areas here.

The Mad Professor

An interesting proposition "rohans" and I am intriuged as I suspect are a few other members of this forum. So far you have identified the client but not yourself, I fear that unless you remedy this discrepency you will recieve only humerous replies to this post.

__________________
It may seem like a good idea at the time , but never stir your cold coffee with a soldering iron.

rohans

Well if I have to reply to a Mad Professor to stop humerous replies, things can only get better!

This is only one of my clients, I cannot explain more on the project unless a confidentiality agreement is signed so anyone that is genuinely intersted in helping me on the project let me know so I can go into more details.

I've recently started a company that designs luxury goods and I have designed a few that incorporate technology within them.

I therefore need someone to work on the project with me, someone with skills in components such as GPS, RF ID, Motherboards, PCB building and software development along with an obsession for pefection.

Hope that answers your question. If you have anymore feel free to ask.

Best, Rohan.

mramos1

If you have GPS, throw out the RFID. I guess you want to know if it left the starting location or moved around.

But again I am in the States, when you guys design it, can I have the exclusive right to the US ?? I will go sell it here. We have people like that as well.

krismoly

I'm from liverpool....maybe alittle to far from london???

I have an interest in GPS and RFID but no experience.

I'm not very experienced but would be interested in helping you if I can.
I am unemployed so would be able to devote a large amount of time if required.

Regards Kris

rohans

Mr Amos, thanks I will keep you updated there is definatly a market in the US as I have already identified it.

The GPS is for one application and the RF ID is for authentication purposes so they are for different purposes.

mramos1

Great. I have done some GPS work as well and dyna-sys.com is where my Grandfather worked, so RFID is not a problem. So if I can help electronically let me know. You know RFID is not very long range right?

HiTech

I apologize for my suspicions (premature or not) but as already mentioned by one person here, you are asking for outside involvement with a project of little known purpose, of which is going to have a direct impact upon the Royal Family? I would think if they are a client of yours, you would be using resources closer to home; those that can be traced and easily contacted/approached if something were to fail or require further action(s). International business or R&D partners usually meet in person before embarking upon a venture.

__________________
Don't make me reach through this monitor to slap you a good one!

rohans

HiTech, its not going to make a direct impact on the Royal Family its a luxury product! It just so happens I have high level contacts and they are intersted in owning one!

I have approached electronics organisations but they don't seem to have the qualities I want. I am not after outside involement, I am looking for someone who is passionate about electronics and luxury to work WITH me - I would want to meet so I can discuss the project in depth and work together to achieve the end result.

I cannot understand what the problem is with that?

Best.

HiTech

Well now that you have explained yourself more clearly, I understand things better. Sounds like something intriguing, however I have many irons in the fire already occupying my time. I was just being nosy. Perhaps you need to locate a "start up" electronics company looking for good ideas to promote growth. Established companies usually have enough going for them so I can understand your poor luck with them. Good luck with your endeavor.

__________________
Don't make me reach through this monitor to slap you a good one!

mramos1

Wish I lived closer. I work for a wealthy family, with planes, boats, yacht, motor homes, buildings, etc.. I get to put all kind of custom things in them.

The Mad Professor

I and many others whom I have contacted would like the following:
Company name, Your name ,home address ,trading address (if differnet), web site (if any) , vat registration number, Letter of introduction from your bank manager, Daytime landline telephone number...
As soon as you provide the documentaion for inspection and they have been subsequently verified independantly, I can have my beautiful assistant begin the credit and CRB checks upon yourself.

You claim to be in business , stand up, quit hiding and have some pride in your company. Now how you manage your client list is your affair Rohan, however. If one of my minions divulged such sensitive information I would have them escorted from the grounds without delay and they would feel the full wieght of the small print in thier employment contract.

Anyhow , look forward to your reply, until then TTFN

__________________
It may seem like a good idea at the time , but never stir your cold coffee with a soldering iron.